125 ℃ heat shrinkable tube,  thermal shrinkable tube is composed by the soft environmental protection, flame retardant, radiation crosslinked polyolefin.It has passed UL and CSA Certification. The product is different from ordinary flame retardant heat shrinkable tube.It does not contain poisonous material. It also accords with Europe RoHS Environmental directives. Widely used in cable insulation protection, insulation treatment or stress solution of end or at the end of the joint Besides, covering and insulation protection wire processing, solder joints coating protection, electronic components, resistor, Capacitance of the insulation protection, metal rust and corrosion resistance of products, such as color of wire label or mark .
continuous Working temperature: – 55 ℃ ~ 125 ℃
shrinking  temperature: 70 ℃
flammability:UL224,VW-1

x01

125 ℃ double-wall thermal shrinkage tube with adhesive is soft, flame retardant, irradiation crosslinking double-wall plastic heat shrinkable sleeving, the inner layer has good adhesive performance of hot melt adhesive, outer layer is made of flame retardant,irradiation crosslinking and soft polyolefin, which can shrink to 1/3 or 1/4. After shrinking, hot melt adhesive can be connected on both ends of the material .and the protected articles can be completely sealed .Namely,it had good ability to proof bad environment, moisture etc.And it is not only easy installation,but also not needed to maintain, ability .Dual wall heat shrinkable tube is generally used in line Cable connection, cables and components of the sealed moisture-proof, waterproof, anti-corrosion and insulation protection, repair the damaged Cable insulation, etc. Dual wall heat shrink tubing has three shrink ratios : 2:1,3:1 , 4:1  so that it can complete the sealing insulation protection between connector and Cable.Because it contains hot melt adhesive,it has a good performance of moisture-proof, waterproof, corrosion resistance.That’s to say,dual wall shink tube has good physical properties, chemical properties and electrical performance . Hot melt glue has good adhesive property for plastic, rubber and metal, etc.
continuous Working temperature: – 55 ℃ ~ 125 ℃
shrinking  temperature:80 ℃
flammability:UL224,VW-1

x02

110℃ Non slip heat shrinkable tube is manufactured from a RoHS compliant, irradiation cross-linked polymer alloy, followed by a special surface treatment. It provides a durable decorative diamond surface finish with increased friction and anti-slip properties.
The 2:1 shrinkage ratio recovers to provide a tight covering over irregular shapes. It can easily be cut to length and quickly applied with a hot air gun.Skid proof heat shink tubing has five colors for your choice,black,yellow,green,blue,red.
continuous Working temperature: – 55 ℃ ~ 110 ℃
shrinking  temperature:60 ℃
flammability:UL224,VW-1

 

More information,pls contact me marryrose@dicore.cn