Product Description

High Gel Re-enterable Encapsulant

High Gel Re-enterable Encapsulant, re-enterable encapsulant, high gel encapsulant

Model: HGRE

Description

High Gel Re-enterable Encapsulant is a two-part nonurethane encapsulating compound. The encapsulant aggressively adheres to filled cable and is compatible with common plastics used in telephone splice connectors. The encapsulant permists easy cable splice re-entry for future changes and maintenance.

Using guide

Mix the two parts of Encapsulant together, and make sure they are mixed enough through continuing stirring for about 5minutes. Then wait for 2-5hours to make encapsulant solidify enough.

Technical Data

Property Test Method Typical Data
Tensile strength ASTM D412 126kN/m2 at 24℃
Elongation at break ASTM D412 at24℃ 300%
Tear Strength ASTM D62415in./min. 595N/m at24℃
Water Absorption ASTM D570 <0.2% gain
Viscosity Part A&B mixed Brookfield Viscomerter 670cps at24℃ (4 minutes) ,2150cps at4℃ (4 minutes)
Gel Time Sunshine Gel Meter 120min at4℃,78min at24℃,45min at43℃
Polycarbonate Compatibility No Stress Cracking or physical property changes observed in samples
Color Amber, Transparent
Odor Essentially odorless
Shelf Life No changes in gel time and physical properties after 14days at 140
Bond to materials Good adhesion
Water Sensitivity <1.0% oberved

Ordering information

High Gel Re-enterable Encapsulant is available in the following packing:

1. two plastic bottles of 30ml

High Gel Re-enterable Encapsulant plastic bottle packing

2. two pop-cans of 100ml

High Gel Re-enterable Encapsulant pop-cans packing

3. one bag with two parts, a clip in the middle. 1000ml.

High Gel Re-enterable Encapsulant bag packing

*Alternative products for 3M 8882 High Gel Re-enterable Encapsulant