Product Description

Heat Shrink Cable End Cap

Heat Shrink Cable End Cap, tyco SSC, raychem ESC

Model: HSEC

Applications

Heat Shrink Cable End Cap is Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.

Technical Data

Property

Test Method

Typical Data

Operating temperature

IEC 216

-55℃ to +110℃

Tensile strength

ASTM D 638

>14 MPa

Elongation at break

ASTM D 638

> 400%

Density

ASTM D 792

1.05

Elongation at break after aging

150℃, 168hrs

>300%

Dielectric strength

IEC 243

>15KV/mm

Volume resistance

IEC 93

>1014Ω.cm

 

 

Specification  

Part No.

Inner Diameter

After fully

recovered Length

 ± 10

After fully

recovered Width

 ± 10

Cable diameter

As supplied

(min)

After fully

recovered (max)

Standard length end cap

HSEC-12/ 4

12

4.0

40

2.6

4-10

HSEC-14/ 5

14

5.0

45

2.2

5-12

HSEC-20/ 6

20

6.0

55

2.8

6-16

HSEC-25/ 8.5

25

8.5

68

2.8

10-20

HSEC-35/ 16

35

16.0

83

3.3

17-30

HSEC-40/ 15

40

15.0

83

3.3

18-32

HSEC-55/ 26

55

26.0

103

3.5

28-48

HSEC-75/ 36

75

36.0

120

4.0

45-68

HSEC-100/ 52

100

52.0

140

4.0

55-90

HSEC-120/ 60

120

60.0

150

4.0

65-110

HSEC-145/ 60

145

60.0

150

4.0

70-130

HSEC-160/ 82

160

82.0

150

4.0

90-150

HSEC-200/ 90

200

90.0

160

4.2

100-180

Extended length end cap

HSEC-L-14/ 5

14

5.0

55

2.2

5-12

HSEC-L-42/15

42

15.0

110

3.3

18-34

HSEC-L-55/ 23

55

23.0

140

3.8

25-48

HSEC-L-62/ 23

62

23.0

140

3.8

25-55

HSEC-L-75/ 32

75

32.0

150

4.0

40-68

HSEC-XL-75/ 36

75

36.0

170

4.2

45-68

HSEC-L-105/ 45

105

45.0

150

4.0

50-90

 End cap with valve is available on request.