Product Description

Adhesive-lined Heat Shrink Mini Cap

Adhesive-lined Heat Shrink Mini Cap, heat shrink end cap

Model: HSMC

Description

Adhesive-lined Heat Shrink Mini Cap (HSEC) is specially designed to provide mechanical and environmental of stub splice in electrical harness. Clear caps allow see-through inspection. Black caps are flame-retardant.

Features

> 4:1 shrink ratio allows a few sizes to cover a wide range of splice

> Mechanically tough jacket provides strain relief and abrasion protection.

> Thick adhesive liner forms an effective barrier against fluids and moisture and performs well at an extended temperature range.

> Colors: Black or Clear

> Operating temperature:-40 ℃ to 105 ℃

> Minimum shrink temperature: 100 ℃

> Minimum fully recovery temperature: 135 ℃

Technical Data

ProPerty Test Method Typical Data
Tensile strength ASTM D 2671 10.4Mpa (min.)
Tensile strength after aging158℃、168 hrs ASTM D 2671 Remains 70%
Elongation at break ASTM D 2671 200% (min.)
Elongation at break after aging  158℃、168 hrs ASTM D 2671 100% (min.)
Longitudinal shrinkage UL 224 0 to – 10%
Heat shock 250℃、4hrs No cracking、no dropping
Cold bend -40℃、1hr ASTM D 2671 No cracking
Voltage withstandAC 2500V、60 seconds ASTM D 2671 No breakdown
Volume resistance ASTM D 876 1014Ω.cm (min.)
flammability SAE-AMS-DTL-23053/5 Self extinguish in 30 sec.
Copper corrosion158℃、168 hrs UL 224 pass
Water absorption ASTM D 570 < 0.5%

Specifiction

HSMC-E  mm(inch)

PartNumber StandardLengthas supplied(mm) Inner Diameter as supplied (Min) Inner Diameter Recovered(Max) Recovered Total wall Thickness (Min) Recovered Jacket wall Thickness (Min) Recovered Adhesive wall Thickness (Min)
HSMC-E-1 30.35 5.72(0.225) 1.27(0.050) 1.20(0.047) 0.64(0.025) 0.56(0.022)
HSMC-E-2 30.35 7.44(0.293) 1.65(0.065) 1.52(0.060) 0.76(0.030) 0.76(0.030)
HSMC-E-3 40.50 10.85(0.427) 2.41(0.095) 1.91(0.075) 0.89(0.035) 1.37(0.054)

HSMC-D mm(inch)

PartNumber Size Total Length as supplied Workable Length as supplied Inner Diameter as supplied (Min) Inner Diameter recovered (Max) Recovered Total Wall Thickness
HSMC-D-1 1/8 22.0(0.87) 12.7(0.50) 3.2(0.125) 0.58(0.023) 1.22±0.15(0.048±0.006)
HSMC-D-2 3/16 25.4(1.00) 15.2(0.60) 4.8(0.187) 1.52(0.060) 1.57±0.20(0.062±0.008)
HSMC-D-3 1/4 28.4(1.12) 15.2(0.60) 6.4(0.250) 2.03(0.080) 1.98±0.20(0.078±0.008)
HSMC-D-4 3/8 31.8(1.25) 18.3(0.72) 9.5(0.375) 2.29(0.090) 2.08±0.25(0.082±0.010)
HSMC-D-5 1/2 38.1(1.50) 21.6(0.85) 12.7(0.500) 2.29(0.090) 2.54±0.25(0.100±0.010)