Heat shrink Insulating tape is specially designed to repair the buried / over the cable or pipe It is mainly used for insulating, anti-corrosive and mending purposes at the bending part. It may also be wound around the whole cable or pipe for insulating and anti-corrosive purpose. It uses crosslinked polyolefin as the base material with a special heat seal coating. Sound bonding is formed on the pipe or cable surface when applied together with solid epoxy coating.

We named it HSIT .

Let’s share some picture of heat shrink insulating tape application .

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Partial Repair of the cable protective layers suffered by mechanical and heat damage and erosions and breakages caused by organic solvents;
2. Waterproof treatment at the ends of protective sleevings of heat shrinkable power cable joints;
3. Protection of electriferous naked conductors and treatment of shortcut circuit caused by icicles;
4. Anti-corrosion and seal of pipes;
5. Insulation of bus bars in switch gear cupboards and power stations;
6. Other areas where insulations and seals are needed.

Color: Red, Yellow, Green and Black

Characteristics:

1. Self shrink rate> 30%;
2. Operating temperature: -55℃~105℃;
3. Shrink Temperature: 125℃.

Property:

Property

Test Method

Standard Value

  Tensile strength   ASTM D638   ≥10.4MPa
  Elongation   ASTM D638   ≥200%
  Tensile after aging   ASTMD 2671/120℃, 168h   ≥10MPa
  Elongation after aging   ASTMD 2671/120℃, 168h   ≥200%
  Dielectric Strength   IEC 243   ≥10kV/mm
  Volume Resistivity   IEC 250   ≥1014Ω. cm

 

Specification:

Size

Standard Width(mm)

Standard Thickness(mm)

Standard Length(m)

  HSIT-0825   25   0. 8±0. 1   5 or 10
  HSIT-0850   50   0. 8±0. 1   5 or 10
  HSIT-08100   100   0. 8±0. 1   5 or 10
  HSIT-1025   25   1. 0±0. 1   5 or 10
  HSIT-1050   50   1. 0±0. 1   5 or 10
  HSIT-10100   100   1. 0±0. 1   5 or 10
   HSIT-S    50
  1. 5±0. 1
   6

Heat Shrink Insulating Tape