Dicore’s industry news, new updated news for heat shrinkable industrials.

2016 IEEE Power & Energy Society General Meeting

2016 IEEE Power & Energy Society General Meeting will be held on July 17 – July 21, 2016. The Meeting location is Boston Sheraton.

IEEE PES 2016 could be a spectacular Meeting which will cover the topics of Electric Power, Electrical Engineering, Electricity, Power, Power Quality, Energy Forecasting, Electricity Market and Smart Buildings and more.

This […]

By |December 18, 2015|Industry News|0 Comments|

Heat Shrink Butt Connector Installation Instructions

Make wire inserted into the terminal, use clamps to make sure the wires are good fixed, heating with a heat gun, the connectors will protect wire as a whole new wire, not loosen prematurely.

Solder Sleeve Wire Splices Install Instruction

Make wires inserted into the terminal, heating with a heat gun, make sure the wires are soldered by the connector, and it will protect wire as a whole new wire, not loosen prematurely.

Fiber optic heat shrink sleeve

Optical fiber heat shrinkable tube is comprised of heat shrink tube, hot melt tube and stainless needle (or ceramic rod/quartz rod)...
By |January 18, 2014|Industry News|0 Comments|

PTFE heat shrink tube

260 ℃ PTFE heat shrinkable tube with high temperature resistance, corrosion resistance, high pressure resistance,flame retardant...
By |January 18, 2014|Industry News|0 Comments|

Heat shrinkable identification tubing

Heat shrinkable identification tubing is based on the material of thermoplastic polyolefin ,with the auxiliary material such as flame retardants without toxic substances and additives for composite polymer materials, then extruding into tubes.
By |January 18, 2014|Industry News|0 Comments|

Double wall Heat Shrink Tubes

125 ℃ Double wall heat shrink tube is soft, flame retardant, irradiation crosslinking double wall gel heat shrinkable tube. The inner wall have a good performance of hot melt adhesive, the outer layer is soft, flame retardant, radiation crosslinked polyolefin
By |January 18, 2014|Industry News|0 Comments|

PVC Heat Shrink Tubes

PVC heat shrink tube, has the special function of shrinking when heated.Its specifications from Φ 2 - Φ 200. PVC heat shrinkable tube has three series of heat resistant temperature 85℃,105℃,125℃.
By |January 18, 2014|Industry News|0 Comments|

Polyolefin heat shrink tubes

As we all know, polyolefin is a widespread material in heat shrink tube. Although there are many materials that can be choice of heat shrikable tube,but polyolefin heat shrink tube is absolutely in the high level.
By |January 18, 2014|Industry News|0 Comments|

Busbar heat shrink tube

Busbar heat shrink tube provides insulation enhancement and protection against flashover and accidentally induced discharge. Particularly useful in confined spaces Raychem tubing can be used on both circular and rectangular copper or aluminium busbars.
By |January 18, 2014|Industry News|0 Comments|